Stans No Tubes ZTR Crest Disc MTB 32/28 Hole Rim

Stans No Tubes ZTR Crest Disc MTB 32/28 Hole Rim: The result of blending a ZTR Race rim with a ZTR 355, the ZTR Crest is the best of both worlds. All the wall thickness and corresponding durability of a 355 with the next generation BST creating a wider rim cavity with shorter sidewalls. Fully tubeless compatible with the 21mm yellow tape or the 25mm yellow tape and valve stem. ISO 559×21 ERD 540 Size: 26"x24.4 Colour: Black/White Hole: 32 and 28 Brakes: Disc Weight: 340g Tape Width: 21-25mm

Price: £54.74

Stans No Tubes ZTR Crest Disc MTB 32 Hole 29er Rim

Stans No Tubes ZTR Crest Disc MTB 32 Hole 29er Rim: The result of blending a ZTR Race rim with a ZTR 355, the ZTR Crest is the best of both worlds. All the wall thickness and corresponding durability of a 355 with the next generation BST creating a wider rim cavity with shorter sidewalls. Fully tubeless compatible with the 21mm yellow tape or the 25mm yellow tape and valve stem. ISO 622 x 21 ERD 605 Size: 29"x24.4 Colour: Black and White Hole: 32 Brakes: Disc Weight: 370g Tape Width: 21-25mm

Price: £56.24

Stans No Tubes ZTR Podium MMX Disc MTB 32 Hole Rim

Stans No Tubes ZTR Podium MMX Disc MTB 32 Hole Rim: Brand new, ultra-lightweight XC race rim from No Tubes. Under 290g. Brand new for 2010, the Podium MMX rim is a development of the hugely successful Race rims. Weighing in at under 290g per rim they build a superlight wheelset whilst still being wide enough to hold tyres in a great profile. Sub 1230g wheelsets are easily achievable. Designed to run non-UST tyres without tubes they feature the next generation bead hook and ultra low profile sidewalls to keep the tyre firmly seated at all times and virtually eliminate pressure loss through burping . As a full-on XC race rim, they have a limited lifespan of 3000-5000 miles depending on the rider and also have a recommended rider weight limit of 170lbs but will provide the best performance possible. You need to seal the rim with tape such as the 25mm Yellow spoke sealing tape to make them airtight and use an Olympic valve for running them tubeless. They can also be used with tubes if necessary. Recommended rider weight limit of 170 pounds Intended for low pressure use, 15 – 33 PSI with 2.0 tyres Rim weight 288g on average Tubeless compatible using NoTubes 25mm wide yellow tape and Olympic valve stems (no rim strip needed. UST tyres are usually too tight on these rims)

Price: £67.50

Stans No Tubes ZTR Flow Disc MTB Rim (29er)

Stans No Tubes ZTR Flow Disc MTB Rim (29er): A great rim for all mountain, heavy duty trail use as well as slalom, mountain cross, or Super-D events Bead Socket Technology: By eliminating the bead hook and lowering the sidewall by 2-3mm we reduce the weight of the rim. Some of this material can be used in the centre part of the rim making it stronger and stiffer. The curve of the rim sidewall is the same shape as the bead of the tyre so they fit together like a ball and socket joint. This design will help reduce the strain on the tyre bead while creating a tighter seal. By lowering the sidewall of the rim we also reduce the mechanical leverage the tyre has on the rim. This will make the rim stiffer and last longer by eliminating flexing that can cause cracking. With these short sidewalls the tyre should not hit the rim and pinch flat as often as standard rims, either with or without tubes. This design will allow you to run lower pressures and use 4mm more of the tyre than ever before. The tyre will have larger air volume giving you better traction. Yellow Spoke Tape: The ZTR Flow, like our other rims is fully compatible with the yellow tape and valve method for tubeless use. The Flow rim however uses a 25mm wide yellow tape as opposed to the 21mm tape used in the many of the other rims. Most riders elect to use the thin 5g yellow spoke tape and no rim strip. All wheelsets built by No Tubes will have the yellow tape and valve installed as standard practice. The tape and valve method creates a lighter wheelset and the rim design will allow you to run extremely low pressures with very little or no burping. A great rim for all mountain, heavy duty trail use as well as slalom, mountain cross, or Super-D events Welded joint FEA optimized center arch for added stiffness Can be used with or without tubes Rim features: ISO 622×22.6 ERD 600 mm Weight 525g (white 32mm hole) Available in Black or White Maximum Tyre Pressure 2.0 tyre 40psi 2.3 tyre 38psi

Price: £59.24

Stans No Tubes ZTR Flow Disc MTB Rim (26 Inch)

Stans No Tubes ZTR Flow Disc MTB Rim (26 Inch): A great rim for all mountain, heavy duty trail use as well as slalom, mountain cross, or Super-D events. Bead Socket Technology: By eliminating the bead hook and lowering the sidewall by 2-3mm we reduce the weight of the rim. Some of this material can be used in the centre part of the rim making it stronger and stiffer. The curve of the rim sidewall is the same shape as the bead of the tyre so they fit together like a ball and socket joint. This design will help reduce the strain on the tyre bead while creating a tighter seal. By lowering the sidewall of the rim we also reduce the mechanical leverage the tyre has on the rim. This will make the rim stiffer and last longer by eliminating flexing that can cause cracking. With these short sidewalls the tyre should not hit the rim and pinch flat as often as standard rims, either with or without tubes. This design will allow you to run lower pressures and use 4mm more of the tyre than ever before. The tyre will have larger air volume giving you better traction. Yellow Spoke Tape: The ZTR Flow, like our other rims is fully compatible with the yellow tape and valve method for tubeless use. The Flow rim however uses a 25mm wide yellow tape as opposed to the 21mm tape used in the many of the other rims. Most riders elect to use the thin 5g yellow spoke tape and no rim strip. All wheelsets built by No Tubes will have the yellow tape and valve installed as standard practice. The tape and valve method creates a lighter wheelset and the rim design will allow you to run extremely low pressures with very little or no burping. Use: 26" rim Welded joint FEA optimized center arch for added stiffness Can be used with or without tubes Rim features: ISO: 559×22.6 ERD: 536 mm Weight: 470g Maximum Tyre Pressure: 2.0 tyre 40psi 2.3 tyre 38psi 2.7 tyre 35psi

Price: £59.24